Blog
// CUSTOM & COMPLIANCE

T1 document and customs transit: what it is, how it works and what the MRN is for

What the T1 document is, how it differs from T2, what the MRN is and how a customs transit is opened and closed step by step, without losing track of a single container.

A container arriving at the port of Valencia bound for a warehouse in Madrid does not have to be cleared at the port. It can travel inland with duties and import VAT suspended and be cleared there, under a T1 transit document. It is one of the most useful tools in international trade and also one of the biggest headaches when a transit is not closed on time.

This guide explains what customs transit is, how T1 differs from T2, what the MRN is and how a transit is opened and closed step by step. It also covers the most common mistakes and where the time goes on the paperwork side.

What is customs transit?

Transit is a customs procedure that lets goods move from one point to another within the customs territory without paying, at that moment, the import duties and other taxes that would otherwise apply. Those charges are suspended, backed by a guarantee, until the goods reach their destination and are placed under another procedure, usually release for free circulation, or leave the territory.

Within the European Union this is called Union transit. When the route includes countries outside the EU that have signed the Convention on a common transit procedure, it is called common transit. Those countries include the EFTA members (Switzerland, Norway, Iceland and Liechtenstein), the United Kingdom, Türkiye, North Macedonia, Serbia, Ukraine and Georgia; Moldova and Montenegro joined on 1 November 2025, according to the European Commission.

What is a T1 document and how does it differ from T2?

“T1” is the name the industry uses for the transit declaration covering non-Union goods, that is, goods that have entered the EU but have not yet been cleared. This is external transit: the goods travel with duties and import VAT suspended.

T2 is used for Union goods that have to cross a non-EU country, such as Switzerland, on a journey between two Member States. This is internal transit, and it allows the goods to keep their Union status when they re-enter. There is also a T2F variant for shipments to or from territories with special tax rules, such as the Canary Islands.

Although people still talk about a “document”, the T1 is no longer a paper form. The declaration is lodged electronically in the EU transit system, the NCTS, now in its phase 5. What travels with the goods is the transit accompanying document: a printed sheet with the operation number and its barcode.

What is the MRN?

The MRN (Movement Reference Number) is the unique identifier the system assigns to each transit declaration, and to export declarations too, once customs accepts it. It has 18 characters: it starts with the last two digits of the year and the code of the issuing country, and ends with a check digit.

The MRN is the key to the whole operation. It is used to present the goods at the office of destination, to check the status of the transit and to trace the operation if something goes wrong. The European Commission runs a public lookup for transit and export MRNs, and national customs portals let operators check them too.

How a T1 transit works, step by step

A typical external transit, for example from a port to an inland customs office, goes through these stages:

  1. Provide a guarantee. The holder of the procedure, usually the freight forwarder or customs representative, must guarantee the suspended duties. A comprehensive guarantee covering several operations is common.
  2. Lodge the transit declaration in NCTS at the office of departure, with details of the goods, the means of transport, the destination and any previous documents, such as the entry summary declaration.
  3. Get the goods released. The office of departure accepts the declaration, assigns the MRN, sets a time limit to reach the destination and may decide to seal the container or inspect the load.
  4. Transport the goods with the transit accompanying document, along the planned route and within the time limit.
  5. Present them at the office of destination, which checks the arrival, the seals and the MRN and reports the result to the office of departure.
  6. End the procedure. The office of departure closes the transit and the guarantee is freed up for new operations. From there, the goods are cleared at destination, usually with an import customs declaration (DUA).

Companies that move transits frequently can obtain authorised consignor or authorised consignee status, which lets them start or end a transit at their own premises without presenting the goods at the customs office.

Common mistakes in customs transit

Most problems do not appear when the transit is opened, but weeks later, when someone discovers it was never closed. These are the most frequent:

  • Transits left open because the goods were not presented at destination or the office of destination did not record the arrival. If this is not cleared up, customs can claim the duties from the holder of the procedure and call on the guarantee.
  • Missed time limits, when transport is delayed and nobody reports it.
  • Data that does not match between the transit declaration, the bill of lading or CMR, the commercial invoice and the packing list: different package counts, weights or descriptions.
  • An exhausted guarantee, tied up by open transits that should already have been closed.

All four have the same root cause: the information about the operation is scattered across documents and systems, and nobody sees the full picture until there is a problem.

An example: weekly transits between the port and Madrid

A Madrid freight forwarder handles around 30 containers a week that arrive through the port of Valencia and are cleared at an inland customs office close to its clients’ warehouses. For each one, its customs department prepares a T1 using the bill of lading, commercial invoice and packing list sent by the shipping line and the importer.

In a manual process, a customs clerk copies that data into the customs software, checks by eye that packages and weights match, lodges the declaration and notes the MRN in a spreadsheet for follow-up. Days later, someone else goes through the spreadsheet to see which transits have been closed. When a container is delayed or a closure is not recorded, the alert comes late, sometimes in the form of a formal request from customs.

With documents read automatically, the data from the bill of lading, invoice and packing list is extracted on arrival, cross-checked and fed into the customs system without retyping. Discrepancies are flagged before the declaration is lodged, and every MRN is linked to its file, with its status in plain sight.

80% less manual time in document processes automated with Kaiona.

Where the time goes in transit management

Lodging the declaration in NCTS is quick. What eats up hours is everything before and after it: gathering the documents for each container, transcribing their data, checking that they match and following each MRN until it is closed. In a customs department working with several systems, the same piece of data can be typed three times: in the TMS, in the customs software and in the tracking spreadsheet.

That is exactly the part Kaiona tackles. It reads transport documents, invoices and customs declarations automatically (K-Scan), groups them by file with their checks (K-Flow) and connects the TMS or ERP to the customs system so the data is entered only once (K-Plug). We explain the role of the freight forwarder in this chain in another guide.

If your customs team spends more time transcribing and chasing transits than resolving them, Kaiona can help you measure how much of that work can be automated without changing systems. We explain how on our customs software page.

Key takeaways

  • Customs transit lets goods move with duties and import VAT suspended until they reach their destination, where they are cleared or leave the territory.
  • T1 covers non-Union goods (external transit); T2 covers Union goods crossing a non-EU country (internal transit).
  • The MRN is the 18-character identifier NCTS assigns to each transit, used to track it until it is closed.
  • A transit left open can end in a claim for duties; linking every MRN to its file keeps track of each one.
// FAQ

Frequently asked questions

What is a T1 document?

It is the EU external transit declaration: it allows non-Union goods to be moved from one customs office to another with duties and import VAT suspended. It is lodged electronically in NCTS, and the goods travel with an accompanying document that includes the MRN.

What is the difference between T1 and T2?

T1 is used for non-Union goods that have not yet paid duties. T2 is used for Union goods that cross a non-EU country, such as Switzerland, between two points in the EU, so that they keep their Union status when they re-enter.

What is an MRN in customs?

The Movement Reference Number, a unique 18-character code the customs system assigns to each transit or export declaration. It is used to present the goods at destination and to check the status of the operation.

Who can lodge a T1?

The holder of the transit procedure. This can be the trader itself or, more often, a freight forwarder or customs representative acting on its behalf and providing the guarantee that covers the suspended duties.

What happens if a transit is not closed?

No, Kaiona is not a traditional SaaS. We don't sell you a generic platform that you have to adapt to, nor a monthly user license for your team to do the work.

Kaiona functions as a custom artificial intelligence and automation layer that connects directly with your current systems (ERPs, CRMs, document management). We handle the technical complexity so that you only see the results within your usual workflow.

// AUTOR
Kaiona Tech
The Kaiona Tech team: 20+ years in supply chain, applying AI to the paperwork of freight forwarders, customs brokers and logistics operators.

Related blog posts